JR broke more... Hubs

[JR74CJ5]

I just went out and checked my grade 8 bolts, they are 1.25 long. You should be good to go.

Thank you!

I was worried after ordering them, but figured I'd see when I got home...

So I appreciate you looking Old Dog!



~ JR

 

[Old Dog]

Not a problem, It's all apart for new spindle bearings and axle seals

 

[JR74CJ5]

well the old briken bolt ends came out no problems. I had a standard right hand thread drill bit, and a left hand drill bit, and the ez outs. didnt even need the ez outs. The left hand bit took em out no problem.

So I cleaned everything up, changed out all the grease in the hubs and bearings, and put it all back in there and caped them off with these sweet new Stage 8 Lock bolts!

Think they'll work out just fine... I got them all lined up right for the stopping from backing out position.




~ JR

 

[JR74CJ5]

Sorry for the delay JR, was out testing the locks .
Stage 8 Manual Locking Hub Fasteners
Here's the part you can locate a vendor, same as you I did not find a current listing at Summit.

No worries bud,

So when you go to summit, you can buy them, just blindly...

Stage 8 Locking Fasteners 8901 - Stage 8 Locking Fasteners Transfer Cases & Components - Overview - SummitRacing.com

Haven't checked Price out yet. (against elsewhere)




~ JR

All good so far, this is the fix I've used...

All and until next "Jr Broke...." thread...

~ JR

 

[Old Dog]

Good to see you got it back together and running again.

 

[Petescj]

until next "Jr Broke...." thread...
~ JR

Ok your overdue as of now. Wish I was in the same boat.

 

[JR74CJ5]

Lol u didnt see my new "alternator putting out 25 v thread" yet. Huh? Lol

 

[Petescj]

Nice to see your back on track.

Lol u didnt see my new "alternator putting out 25 v thread" yet. Huh? Lol

 

[Sasquach]

JR please don't make me reread the entire thread...but did'nt you crater a hub? maybe it was just broken bolts.
Glad your up and running again, me I'm waiting for brown to bring a new H2o pump.