Name these parts?

[buzzardsroost]

I for the life of me can't remember where these parts were removed from. There are two thick ones and two thinner ones. One thick one and one thin one is about 3/8" thick. They do have the same hole spacing and hole diameters of the crossmember for the Transmission /transfer where it bolts to the frame. If so, they must go between the crossmember and the frame???????

They would make a good trans/transfer lowering kit unless they belong somewhere else somewhat more important.........

I tried to take an many pics as I could removing everything but apparently between my lack of pics, CRS and/or Jim Beam, I FORGOT.

Please don't tell me they belong somewhere that I already put together or installed..... It doesn't matter, it's all good......

 

[CJ]

Exactly right! Between the cross member and the frame to lower the Transmission and Transfer Case .

 

[elwood blues]

Exactly right! Between the cross member and the frame to lower the trans and transfer case.

Yeap, what he said.

 

[buzzardsroost]

Thanks guys. I always say sometimes, "I'll remember where that belongs" but from time to time, I don't.

 

[elwood blues]

buzzardsroost, I'm the exact same way, don't feel bad