New gear setup howling
JohnKcj5
Jeeper
On jack stands in second gear at idle rpm, I can hear the diff whining. So I pulled the differential cover again to check things out. Ran the gear pattern again and checked the backlash. For some reason the backlash jumped from .007 to .015. I know that's no good. Pinion preload set to 20 in.lbs. But I'm wondering if the gear pattern is off and also a part of the problem. Am I too deep? Hopefully you can see the pic by grabbing this URL. I still can't get pics to post.
https://photos.app.goo.gl/hiMaZygrSisrSFYR8
https://photos.app.goo.gl/hiMaZygrSisrSFYR8
Last edited: