• Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
    To dismiss this notice
    click the top right X.

Pictures of SBC conversion clutch linkage

Pictures of SBC conversion clutch linkage

ckhiltunen

Jeeper
Posts
12
Thanks
0
Location
Southeast Michigan
Vehicle(s)
85 Scrambler 307 Chevy V8, T176 trans, dana 300 stock axles.
Does anyone have any pictures or diagrams of clutch linkage for a small block conversion. I'll be using a T-176 with chevy bellhousing and advance adapters adapter. I'm thinking of mechanical clutch but not totally sold on it yet. Any help and input would be great.
 
go with a hydrolic clutch. much easier to make work.
 
I went with a hydraulic set-up when I did my SBC swap. It is in my opinion the best way to go, no linkage to deal with, no popping off, no adjustments etc.

I used a factory Chevy hydraulic bell from a 86 Chevy pick-up, and them got a new slave cylinder for that truck from the parts store, and the feed hose. I then got a factory Jeep clutch master cylinder that mounts to the firewall. The Jeep master works just fine with the Chevy slave.
 

Jeep-CJ Donation Drive

Help support Jeep-CJ.com by making a contribution.

Help support Jeep-CJ.com by making a contribution.
Goal
$200.00
Earned
$40.00
This donation drive ends in
0 hours, 0 minutes, 0 seconds
  20.0%
Back
Top Bottom