What non-CJ vehicle donated its engine to me?
DaveMueller
Active Jeeper
- Posts
- 272
- Media
- 1
- Thanks
- 7
- Location
- Ohiopyle, PA
- Vehicle(s)
- '76 CJ5 with an '88 258 from a YJ.
AMC20, D30, D20, T150.
I scored a pretty nice late model AMC 258 i6 / 4.2l from Craigslist. It was almost worth the 4 hours of NYC traffic we sat in that turned our 15 hour travel time into over 20.
A few cans of spray carb cleaner and a pressure washer later, it cleaned up really nice. The intake and exhaust manifold have a few hundred sensors and ports and heaters.
So I'm trying to figure out what it came from so I can get a FSM for the engine to see what went where, what I should use and what should go away.
From what I can tell, it's a January 1988 block, which means not a CJ. So is there a way to tell what it did come from?
Block 3235444 date code 801C29
Head 3661
Intake 3237858
Exhaust 3237096 - 2AB (?)
Thanks to those who helped with the mount thread sizes. My pallet of death did well for the 450 mile trip home.
Dave
A few cans of spray carb cleaner and a pressure washer later, it cleaned up really nice. The intake and exhaust manifold have a few hundred sensors and ports and heaters.
So I'm trying to figure out what it came from so I can get a FSM for the engine to see what went where, what I should use and what should go away.
From what I can tell, it's a January 1988 block, which means not a CJ. So is there a way to tell what it did come from?
Block 3235444 date code 801C29
Head 3661
Intake 3237858
Exhaust 3237096 - 2AB (?)
Thanks to those who helped with the mount thread sizes. My pallet of death did well for the 450 mile trip home.
Dave