What Transfer case will fit!

[SCswampfox]

I have the quadtrac Transfer Case to the GM Turbo 400 . This one is simple, Im replacing the axles so my drive line is straight. I need a transfer case that will fit the TH400 without any major adjusting.

 

[BusaDave9]

No Transfer Case will be a bolt in swap. You will need an adapter. My recommendation is the Dana 300 . It's a good gear driven transfer case. Here is an adapter to make it work: Adapting the TH400 to the Jeep Dana 300 Transfer Case

Or you can get an adapter to mount a later model New Process transfer cases. It would really be cool if you could get a Rock Trac Transfer case. They have a 4 to 1 low. Check out this link: Adapting the TH400 to Jeep New Process / NVG Transfer Cases

 

[Petescj]

Im all in with Dave on this one. If you already have the correct rear axle to put in the Dana 300 is your best option.