Will the bell housing in a 67 mustang w/ 289 fit in my 79 cj 7 w/ 304?
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
Will the bell housing in a 67 mustang w/ 289 fit in my 79 cj 7 w/ 304?
- Thread starter cww2140
- Start date Start date:
- Last post Last post:
mylittlecj5
RIP Mike, we'll all miss you
what is it you need real bad> the bellhousing or a new engine?
If its just the bellhousing your looking to replace, No I don't think it will bolt to your engine.
If you are trying to put the 289 in your Jeep, it might/might not fit. Go to NovakAdapters.com and read the knowledge base. It should tell you if it is compatible.
But personally I wouldn't put a 289 in a Jeep, unless I wanted to race it. Then I would use a much larger engine anyways...
The 289 is an oversquare engine design, meaning it LOVES to rev, but there isn't a lot of low end to them. I have replaced every 289 I owned (in trucks mostly) with a 302 (or in some cases a 390) and been much happier with the drivability. I did have a Mustang that was 289 powered, and I loved it in there...
If its just the bellhousing your looking to replace, No I don't think it will bolt to your engine.
If you are trying to put the 289 in your Jeep, it might/might not fit. Go to NovakAdapters.com and read the knowledge base. It should tell you if it is compatible.
But personally I wouldn't put a 289 in a Jeep, unless I wanted to race it. Then I would use a much larger engine anyways...
The 289 is an oversquare engine design, meaning it LOVES to rev, but there isn't a lot of low end to them. I have replaced every 289 I owned (in trucks mostly) with a 302 (or in some cases a 390) and been much happier with the drivability. I did have a Mustang that was 289 powered, and I loved it in there...
CJ
Admin
- Posts
- 22,822
- Featured
- 5
- Media
- 897
- Resources
- 193
- Solutions
- 43
- Thanks
- 784
- Location
- Central FL
- Vehicle(s)
- '72 CJ5, 401, T18, D20, D44, D30
'82 CJ8, 258, D300, AMC20, D30
The ford bell housing will not fit the AMC engine - different patterns and size.