79 quadratrac ideas
Naiveambition
Jeeper
- Posts
- 61
- Thanks
- 0
- Location
- Houston
- Vehicle(s)
- 1976 jeep cj7. Quadratrac 1339 transfer case 400 tranny
First off I would like to have full width axles or legal width on my jeep. After research I've concluded that I can only use 74 -79 waggy axles with qtrac.
Are these full width axles that will bolt in.?
Second option is I have a 28 foot dodge motor home with a 360 , I think a 727 tranny, and the rear I'm not sure but I'm gonna say ton , ton and a half?
So... The bright idea is to steal all these parts and buy a 3/4 or 1 ton axle for the front with a Transfer Case out of the old dodge trucks, i think it's a np205 , but don't quote me.
Is this
A. Doable
B. a good choice for the rear, it has dually setup
C. Something I could drive on the street comfortably
D. Will Transmission work in this scenario.
Are these full width axles that will bolt in.?
Second option is I have a 28 foot dodge motor home with a 360 , I think a 727 tranny, and the rear I'm not sure but I'm gonna say ton , ton and a half?
So... The bright idea is to steal all these parts and buy a 3/4 or 1 ton axle for the front with a Transfer Case out of the old dodge trucks, i think it's a np205 , but don't quote me.
Is this
A. Doable
B. a good choice for the rear, it has dually setup
C. Something I could drive on the street comfortably
D. Will Transmission work in this scenario.