AMC 20 diff questions. Hun removal, seals

[jeradv]

Can someone help me out that has been through an AMC20 rear end. I pulled the hubs with a puller and the axle shaft came with it. I thought these were 2 piece so after that I put a 3 jaw on the hub and cranked on it with my 3/4 impact... nothing. Heated with torch... nothing. Am I missing something? Also, do the bearings press on? The bearing and the race/cup came with the shaft when I pulled it which seemed odd as well. Any help would be greatly appreciated.

Sent from my iPhone using Tapatalk

 

[Lumpy Grits]

That IS the OEM 2-piece axle.
Throw it away and get a set of Mosers.......
BTW, you should have left the backing plate bolted to the axle while trying to pull that hub.
YES-the bearing and collar a pressed on.
You really need to get a copy of the real FSM to help you.
LG

 

[jeradv]

any idea where I can get a copy of the FSM? I’ve looked for a real copy for months but the ones I see on eBay just seem to be more like an owners manual.


Sent from my iPhone using Tapatalk

 

[Scout1067]

any idea where I can get a copy of the FSM? I’ve looked for a real copy for months but the ones I see on eBay just seem to be more like an owners manual.


Sent from my iPhone using Tapatalk

Collins Bros Jeep has it: https://collinsbrosjeep.com/84-86-jeep-service-manual-body-chassis/

Ol Jeep Collins also has some downloadable free FSMs although I did not see an '84 Cj on there: "Small" Jeeps Page

 

[Project86]

Moser.

enough said.