bellhousing identification

[OEM1984CJ7]

I have this bellhousing that came off a T-176 and wanting to know if it will also fit a T-5 ? It looks like it has another set of holes half drilled about 1/4" diameter next to the T-176 holes. Are these where the T-5 holes need to be drilled and tapped? I really don't want to buy another bellhousing and pay freight if I can use this one.

 

[Pscheibe]

try to bolt it up, keep us posted.

 

[BC CJ]

I dont think those other holes are for a different tranny. I'm pretty sure the top two holes are the same on T-176 and T-5 bellhousings but the bottom two are different. You could bolt it up to the top two then drill and tap new bottom holes.

 

[Petescj]

Heres one from a T-5 . The mounting holes are different.

 

[OEM1984CJ7]

Looks like I will need a T-5 bell housing.
Thanks for the info

 

[Petescj]

Looks like I will need a t5 bell housing.
Thanks for the info

You may be able to take it to a machine shop. If not Im sure you can find someone who will swap you for the T-176 bellhousing.