Finally broke my AMC 20 Two Piece Axle

[CJ]

Moser's are USA made.
Superior wasn't------
LG

There had China or USA made, you just needed to know what to order.

 

[Lumpy Grits]

All the AMC20 , 1 piece Moser's I install'd were USA mark'd.
Have no other experience with other Moser products.
LG

 

[Fastatv]

OP-I suggest you also order a spare set of seals and bearing to have on hand.
LG

Hey Lumpy, why do you recommend this since the parts/bearings I'm installing are new.

 

[Lumpy Grits]

Someday down the road you may need'em.
Nice to have on hand and NOT wait for an order to come in--
LG

 

[Fastatv]

Someday down the road you may need'em.
Nice to have on hand and NOT wait for an order to come in--
LG

Ok, gotcha...thanks

 

[wm69]

Moser's are USA made.
Superior wasn't------
LG

Nope

Superiors were made by Foote axle in California....at least the two sets I have are.

"Since 1934, Foote Axle & Forge LLC, has been manufacturing and distributing the Highest Quality axle shafts, input / output shafts and gears in the USA. We are a 100% in-house manufacturer. We forge, CNC machine, heat treat, precision grind and spline right here in our Los Angeles facility."

 

[GARGOYLEJEEPER]

Need extra bearings & seals because set 9 & 10 bearings are weak & small compared to the OE Tapered 2 piece Timken`s. Used to replace all the time no matter who`s axles they were on. Always said nice axles crappy bearings.
The best thing going was Warns full float kit. Or a pair of custom axles from Dutchman using regular bearings both made in Oregon. Or FS Dana 60 cut down.

Now just waiting for the rants & raves.

 

[73CJ]

Nope

Superiors were made by Foote axle in California....at least the two sets I have are.

"Since 1934, Foote Axle & Forge LLC, has been manufacturing and distributing the Highest Quality axle shafts, input / output shafts and gears in the USA. We are a 100% in-house manufacturer. We forge, CNC machine, heat treat, precision grind and spline right here in our Los Angeles facility."

Do you know if they roll their splines or cut them?

Just curious.

 

[GARGOYLEJEEPER]

Roll or hobb (cut). They do both.