Omix-Ada Exhaust Manifold for AMC V8's...anyone?

[65reissue]

Anyone bought any of the Omix-Ada Exhaust Manifolds for CJ with AMC V8's yet? I am having a 360 put in and haven't found much good said about headers...was advised to go the manifold route. I am not having much luck in tracking any options down except these from Omix-Ada...part number 17622-10 and 17622.09. Just wanted to see if anyone has had any experience with these manifolds or not? As always...thanks!

 

[Lumpy Grits]

I haven't seem them. BUT, have'n seen many products with that brand name. I
would be looking in the junk yards first-
LG

 

[65reissue]

I haven't seem them. BUT, have'n seen many products with that brand name. I
would be looking in the junk yards first-
LG

Thanks ... I have been looking around and actually having a pretty tough time finding anything. Haven't posted on Craigslist yet...but would like to get into an original set. thanks again.

 

[Lumpy Grits]

These guys AIN'T cheap-
Collins Brothers Jeeps and Jeep Parts

Think these folks may be you best bet-
J&W Auto Wreckers: New & Used Jeep Parts - Home

LG

 

[hondo]

as said omix=junk

j&w (link posted above) will have them but when i bought mine they wanted $AMC 150 each. if you aren't in a hurry then i would be searching craigslist and posting a wanted ad here.

 

[Hedgehog]

Most any AMC V8 manifold will work on the passenger side. Plenty of those are available especially for Wagoneers. The drivers side drivers side is a different situation. You need a rear dump manifold to clear the clutch/steering linkage.

I've often wondered if a custom exhaust shop would be able to work around the problem areas on the left side.

 

[Woolyworm]

Whatever you end up with I highly recommend remflex gaskets.


Wooly

 

[IOPort51]

If you are replacing the AMC 304 why not use those? they are the same, I think.