the motorcraft 2100-2150 2-bbl carb. and related posts
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.To dismiss this noticeclick the top right X.
the motorcraft 2100-2150 2-bbl carb. and related posts
- Thread starter CJ BRIAN NJ
- Start date Start date:
- Last post Last post:
. Thanks amigo.
johnnyreb
Old Time Jeeper
- Posts
- 1,470
- Media
- 17
- Thanks
- 1
- Location
- tn
- Vehicle(s)
- 1980 cj5 258ci straight 6, 31x10.50's. Partial Teamrush iginition upgrade, MC 2150 Carb. 4.0 head swap, factory header. I call him "Eugene".
Dad's jeep when he raced in the 70's. Cj2 running gear, ford 300 cu in 6 cyl with 3 deuces. Fiberglass model T body and hand laid fiberglass hood. welded 5.38 gears and beer keg fuel tank. see avatar
Wife's: Black 04' Liberty with all the bells and whistles.
what year fords were they used on? It looks like the carb on my 65' falcon with 289.
Anybody adapt these to the AMC 258 i6 / 4.2l ? I was looking at an offenhauser intake and was condering maching a plate to convert the 4 bbl to 2 bbl
Anybody adapt these to the AMC 258 i6 / 4.2l ? I was looking at an offenhauser intake and was condering maching a plate to convert the 4 bbl to 2 bbl
IOPort51
NOT the voice of reason Jeep-CJ.com
- Posts
- 13,956
- Media
- 458
- Thanks
- 11
- Location
- Garland Texas
- Vehicle(s)
- 1977 cj-5
4.2 W/MC2100 carb, 4.0 head W/3 angle valves,SS Header,TFI ignition with MSB-6 offroad module,CS144 140 amp RPS alternator with remote regulator T-150,d-20,Dana 44 with OX lock and disk brakes. D-30 with Spartin locker,
skyjacker 2.5 lift?nitro shocks,31" BFG A/T off road.8000 lb Warn winch, original owner.=^)
2006 Toyota Tacoma
GRONK Performance
Jeeper
- Posts
- 18
- Thanks
- 0
- Location
- Colorado Springs, CO
- Vehicle(s)
- '74 - CJ-5,'71 - Jeepster Commando,8 different AMC Eagles,'72 - Wagoneer,'97 - TJ,'84 - G-Wag
Quick introduction: I am Gronk. (ehrmannmp on EBay) owner of GRONK Performance. I have over 4000 of these carbs in stock and have personally built over 11,000. If there are any questions related to the Motorcraft 2100/2150, I would be happy to answer them. I build/sell about 130 of these every month. I can answer jetting questions/power-valve questions/timing questions, etc. please ask.
CJ BRIAN NJ
Active Jeeper
I got the wrong rebuild kit so I haven't gotten a chance to rebuild my carb , I will go check out your website and maybe I will just order a carb. my carb has an electric choke someone removed and wired open the butterfly so I have no choke , it sucks air and the WIERDEST thing is when the jeep is running at idle and I rock the jeep back and forth the motor stalls?do you sell the carbs complete with the choke setup already installed? there are a few pieces of my choke actually missing so a carb with a 1 wire choke would be great!
welcome aboard the forums I don't have a lot of free time this time of year but I check in whenever I can
thx brian
welcome aboard the forums I don't have a lot of free time this time of year but I check in whenever I can
thx brian
johnnyreb
Old Time Jeeper
- Posts
- 1,470
- Media
- 17
- Thanks
- 1
- Location
- tn
- Vehicle(s)
- 1980 cj5 258ci straight 6, 31x10.50's. Partial Teamrush iginition upgrade, MC 2150 Carb. 4.0 head swap, factory header. I call him "Eugene".
Dad's jeep when he raced in the 70's. Cj2 running gear, ford 300 cu in 6 cyl with 3 deuces. Fiberglass model T body and hand laid fiberglass hood. welded 5.38 gears and beer keg fuel tank. see avatar
Wife's: Black 04' Liberty with all the bells and whistles.
hey Gronk got a suggestion for jet for an MC2100 1.08 in Tn. So not much elevation.