trans question
shepherd1
Jeeper
I heard if you take a 350 2wd turbo Transmission and cut off 1 7/8" off the out put shaft it'll bolt up to a Transfer Case . Anyone every done this mod yet?
-
To celebrate the 4th of July, starting today (07/01/2025) all User Upgrades will be reduced by 10% (thru 07/08/2025) To use this special coupon use the code 2025-4th-10percent at check out. If you are already a supporter your existing package will be extended.
Thank you for your support!
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
trans question
- Thread starter shepherd1
- Start date Start date:
- Last post Last post:
BajaEdition
Resident 'Old' Jeep Shaman
- Posts
- 5,486
- Featured
- 1
- Media
- 136
- Resources
- 2
- Thanks
- 7
- Location
- Riverside Ca
- Vehicle(s)
- 67 cj5,225 Dauntless, D30,chrome molies, detroit, D44, full floating detroit, custom steering, disc all the way around,2 inch lift on 31s, armored up
70 cj6 4 inch lift
step back from the saw buddy and do not get excited
Who in the F*&K tolf you that
you unbolt the tail shaft
bolt on the novak output kit
BrockGrimes
Jeep-CJ.com Archive Master
x2 .
From novak adapters:
"2wd transmissions feature conical shaped tailhousings and an output yoke, which are replaced with a typically shorter 4wd style output shaft (most often included with our adapter assemblies) of varying lengths and spline counts, depending on the application."
From novak adapters:
"2wd transmissions feature conical shaped tailhousings and an output yoke, which are replaced with a typically shorter 4wd style output shaft (most often included with our adapter assemblies) of varying lengths and spline counts, depending on the application."