transmission alignment cj7

[Bobcat48]

Help I am installing a 360 v8 in my CJ7 , doing a complete restoration, I have mounted the engine, Transmission , Transfer Case and transmission mounting plate. After this I notice that the transmission is off center, it is more to the passenger side by about 2 inches is this correct?

 

[Torxhead]

If the bolt holes line up and the tranny is mounted flush to the bell housing, you should be good to go.

 

[Lumpy Grits]

Loosen the engine mount bolts, both on the engine and at the frame.
You may have better luck with line-up then.
Still-May need to use a chain and turnbuckle to 'pull' the tail over.
LG

 

[Saddle Tramp]

Yep, the tranny is mounted off center. Just use the existing holes on the skid plate and all should be good.