AMC 20 axle reinstall?
JohnKcj5
Jeeper
When reinstalling the axles, do the backing plate bolts draw everything back together, or do you have to drive the assembly back together with a hammer?
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
AMC 20 axle reinstall?
- Thread starter JohnKcj5
- Start date Start date:
- Last post Last post:
caveman
Full Time Jeeper
- Posts
- 1,700
- Solutions
- 1
- Thanks
- 64
- Location
- Central Maine
- Vehicle(s)
- 88 YJ with a CJ nose, 4.7 Stroker, AW4 transmission, Dana 35 HP front Ford 8.8 rear
If you didn't pull anything apart on the axle, The backing plate should pull it all together again. Sometimes if it's going hard, I'll tap the end of the axle to help it along.
JohnKcj5
Jeeper
Perfect. All I did was undo the backing plate nuts and use a slide hammer to pull the axle. Got my 3:73 gears and Truetrac installed. Time to do the front!
Thanks, buddy.
Thanks, buddy.
Similar threads
-
Question
Reply's are voted
on for best answer
-
Question
Reply's are voted
on for best answer
-
Question
Reply's are voted
on for best answer
Diff
CJ 6 axle swap
-
Question
Reply's are voted
on for best answer
Engine
WTB AMC 360