Opinions on AMC20 one piece kits
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
Opinions on AMC20 one piece kits
- Thread starter YJason
- Start date Start date:
- Last post Last post:
Sasquach
Crazy Sr. Respected Jeeper
- Posts
- 4,054
- Media
- 35
- Thanks
- 3
- Location
- Santa Ynez, Ca.
- Vehicle(s)
- 1978 CJ5, 258 w/4.0head, Mopar MPI, P.S., P.B.,Tilt wheel, No stereo, t-18, t-20, amc 20, dana-30 w/tru-trac, Warn full float w/locking hubs & Detroit locker in the AMC.
1964 CJ3B, 4-134
1952 M100 trailer
Superior and Moser get the best reviews on the site.
Old Dog
Always Off-Roading Jeeper
- Posts
- 13,880
- Media
- 82
- Thanks
- 6
- Location
- Stonelick Lake, Ohio
- Vehicle(s)
- 83 CJ7 350 tbi, TH350, D300 twin sticked & clocked, narrowed Chief D44 Eaton Elocker & Moser shafts, Explorer 8.8 Detroit locker, 410's, RE 4.5" spring lift 1" body lift, 35" Claws, cage tied to frame, Corbeau baja seats, HD tie rod and draglink, u-bolts flipped, custom skid plate and sliders, Warn 9.5ti winch with Amsteel synthetic line
sorry don't know anyone running GG but the 2 companies above have a lot of happy customers.
Incommando
Senior Jeeper
- Posts
- 945
- Thanks
- 1
- Location
- SW Ohio
- Vehicle(s)
- '77 CJ7 360/T18/D20 D60F/14bolt on 38's,
Stock '91 MJ 4.0/2wd parts runner
Their gear sets are called "genuwhine" because their poor quality leads them to make a bunch of noise. That company is part of a huge corp that specializes in buying up companies for their name, cheapening up the products, and foisting them off through their mail-order business. They have done with pro comp, smittybuilt,and others and recently bought out rubicon express. They are Transamerican Auto and sell as 4 wheel Drive Hardware & 4 wheel parts (4wd.com) ...I bet most of you thought that those two competed against each other but they are the same.
It is one thing to find a company that has good prices on known products but another thing entirely for the company to sell 2nd rate China junk like G2/Transamerican does.
The argument over whether throwing money at a M20 to fix just one of its serious issues rather than replacing it with a better bolt-in axle for less money is a wise decision or not is an old one with purist pointing out the sinking a few hundred bucks into a M20 is worth it while others say spending the same money on a better out of the box axle is a better investment. Spending hundreds on a M20 will get you an axle equal to a stock Dana 44 ..but where do you end up spending that same money on buying and upgrading that Dana 44 ???
It is one thing to find a company that has good prices on known products but another thing entirely for the company to sell 2nd rate China junk like G2/Transamerican does.
The argument over whether throwing money at a M20 to fix just one of its serious issues rather than replacing it with a better bolt-in axle for less money is a wise decision or not is an old one with purist pointing out the sinking a few hundred bucks into a M20 is worth it while others say spending the same money on a better out of the box axle is a better investment. Spending hundreds on a M20 will get you an axle equal to a stock Dana 44 ..but where do you end up spending that same money on buying and upgrading that Dana 44 ???
Old Dog
Always Off-Roading Jeeper
- Posts
- 13,880
- Media
- 82
- Thanks
- 6
- Location
- Stonelick Lake, Ohio
- Vehicle(s)
- 83 CJ7 350 tbi, TH350, D300 twin sticked & clocked, narrowed Chief D44 Eaton Elocker & Moser shafts, Explorer 8.8 Detroit locker, 410's, RE 4.5" spring lift 1" body lift, 35" Claws, cage tied to frame, Corbeau baja seats, HD tie rod and draglink, u-bolts flipped, custom skid plate and sliders, Warn 9.5ti winch with Amsteel synthetic line
Good for you, very good company, I think your be happy.
Incommando
Senior Jeeper
- Posts
- 945
- Thanks
- 1
- Location
- SW Ohio
- Vehicle(s)
- '77 CJ7 360/T18/D20 D60F/14bolt on 38's,
Stock '91 MJ 4.0/2wd parts runner
I have used Moser products for decades in drag cars and even took stuff to them for machine work...I have always found them to be top notch
poppatello
Senior Jeeper
- Posts
- 500
- Thanks
- 0
- Location
- New Castle, De
- Vehicle(s)
- 84 Cj, 4 Banger, 4.5 BDS Lift, 35" KM2, Twin Stick, Nuttered...
Mind if I ask where you purchased them from and about what you paid? You can send me a PM if you feel better. I'm looking @ Moser's myself. Are you just replacing the axles or are you re-gearing as well???
I don't mind sharing. I bought direct from Moser Engineering. ~$320 including shipping. In stock and shipped the same day. 2 day ship time for me.
I will not be regearing at this time. Need to, but have another child due in less than 2 weeks...so priorities will win out. Just trying to get back up and running. Plan on regearing with lockers front and rear late summer.
I will not be regearing at this time. Need to, but have another child due in less than 2 weeks...so priorities will win out. Just trying to get back up and running. Plan on regearing with lockers front and rear late summer.
poppatello
Senior Jeeper
- Posts
- 500
- Thanks
- 0
- Location
- New Castle, De
- Vehicle(s)
- 84 Cj, 4 Banger, 4.5 BDS Lift, 35" KM2, Twin Stick, Nuttered...
Cool thanks, congrats on the new wheeler...
Kane
Full Time Jeeper
- Posts
- 2,796
- Media
- 4
- Thanks
- 1
- Location
- Berlin, CT
- Vehicle(s)
- 1984 CJ-8 Restomod Scout axles 4 wheel disks, 258, ax15, D300.
I 15 years on my moser axles and not a failure yet and they live behind V8 power. On the shafts that is. The bearings have failed twice but that is expected because they used roller bearings back then. Not sure if they use tapered bearings now or rollers.
Similar threads
-
Question
Reply's are voted
on for best answer
-
Question
Reply's are voted
on for best answer
- Solved
