quadratrac
cj7mudder24
Jeeper
im looking to get rid of the QuadraTrac t case, what tcase should i go with along with what axles should i go with? Help is greatly appreciated thanks
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.
quadratrac
- Thread starter cj7mudder24
- Start date Start date:
- Last post Last post:
mylittlecj5
RIP Mike, we'll all miss you
We would need to know what your plans are for how you will be using your CJ before we can begin to recommend something like that.
Why do you want to ditch the QT? Are you planning to keep the Transmission in it already?
Why do you want to ditch the QT? Are you planning to keep the Transmission in it already?
BusaDave9
Always Off-Roading Jeeper
- Posts
- 8,246
- Featured
- 3
- Media
- 361
- Resources
- 2
- Thanks
- 92
- Location
- Durango, Crawlarado
- Vehicle(s)
- 1979 Jeep CJ5 with 304 V8, T18 Transmission, Dana 20 Transfer case with TeraLow 3:1 gears, 4.88 axle gears, Detroit Locker up front and Ox Locker in back with 1 piece axle shafts, 36" SuperSwamper SX Tires, Shackle reversal, MileMarker Hydraulic winch, MSD 6A ignition.
Get a Dana 300 TCase. You will need this adapter too.
Adapting the TH400 to the Jeep Dana 300 Transfer Case
Then you will need an axle with a centered diff.
Lastly you will need the lengths of the drive shafts modified.
Adapting the TH400 to the Jeep Dana 300 Transfer Case
Then you will need an axle with a centered diff.
Lastly you will need the lengths of the drive shafts modified.
cj7mudder24
Jeeper
reason im geting rid of the QuadraTrac is it dont have a low range the one i have dont have the box for it. Also i wanna be able to put it into 2 wheal drive. The jeep is more of a silver lake/street/ carshow toy
BusaDave9
Always Off-Roading Jeeper
- Posts
- 8,246
- Featured
- 3
- Media
- 361
- Resources
- 2
- Thanks
- 92
- Location
- Durango, Crawlarado
- Vehicle(s)
- 1979 Jeep CJ5 with 304 V8, T18 Transmission, Dana 20 Transfer case with TeraLow 3:1 gears, 4.88 axle gears, Detroit Locker up front and Ox Locker in back with 1 piece axle shafts, 36" SuperSwamper SX Tires, Shackle reversal, MileMarker Hydraulic winch, MSD 6A ignition.
You have 2 options I would recommend:
1. I already mentioned that you can get a Dana 300 , A $500 adapter, and replace the rear axle.
OR
2. Get a QuadraTrac with the low gearbox. (this gearbox can also be bolted to your TCase). Rebuild the QuadraTrac with a Milemarker part time kit for $400. You can then add locking hubs. This option will cost less because you won't have to replace the rear axle and the drive shafts won't have to be modified.
http://www.amazon.com/Milemarker-95-91203-Conversion-Overdrive-Quadra-Trac/dp/B000FQ97AS
See also: http://www.jeep-cj.com/forums/f105/transfer-cases-12108/#post97071
1. I already mentioned that you can get a Dana 300 , A $500 adapter, and replace the rear axle.
OR
2. Get a QuadraTrac with the low gearbox. (this gearbox can also be bolted to your TCase). Rebuild the QuadraTrac with a Milemarker part time kit for $400. You can then add locking hubs. This option will cost less because you won't have to replace the rear axle and the drive shafts won't have to be modified.
http://www.amazon.com/Milemarker-95-91203-Conversion-Overdrive-Quadra-Trac/dp/B000FQ97AS
See also: http://www.jeep-cj.com/forums/f105/transfer-cases-12108/#post97071
Last edited:
cj7mudder24
Jeeper
thanks dave for the help i appreciate it i need figure out how much work i wanna do lol
cj7mudder24
Jeeper
do you know where i can get a low range gear box?
BusaDave9
Always Off-Roading Jeeper
- Posts
- 8,246
- Featured
- 3
- Media
- 361
- Resources
- 2
- Thanks
- 92
- Location
- Durango, Crawlarado
- Vehicle(s)
- 1979 Jeep CJ5 with 304 V8, T18 Transmission, Dana 20 Transfer case with TeraLow 3:1 gears, 4.88 axle gears, Detroit Locker up front and Ox Locker in back with 1 piece axle shafts, 36" SuperSwamper SX Tires, Shackle reversal, MileMarker Hydraulic winch, MSD 6A ignition.
I think you might have to get the whole TCase used, maybe at a salvage yard or eBay. My thoughts are that you could either rebuild the TCase or just use the low range gearbox on your TCase.
mylittlecj5
RIP Mike, we'll all miss you
I have one on the rack, but I am not equipped to ship anything of that size. You feel like a 13 hour drive? lol
cj7mudder24
Jeeper
Similar threads
-
Question
Reply's are voted
on for best answer
TCase
Gear Oil question!
-
Question
Reply's are voted
on for best answer
-
Poll
Best for votes
on specific items
-
Question
Reply's are voted
on for best answer
Misc
wheel question
