• Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.

What did you do to or with your CJ today?

Highlights Only
What did you do to or with your CJ today?
I did it finally..... I got my driver side axle shaft in and diff filled up and have working 4 wheel drive


Sent from my iPhone using Tapatalk
 
Finally hot a chance to put the new wheels on my CJ7 that have been sitting in my basement since October when I had shoulder surgery. I am slowly amassing the parts for March when I will pull the tub, paint it, treat the frame, rebuild my Transmission and put my new wiring harness in. 2309cd7a6b68c13b1933d49689a4387d.webp

Sent from my SM-A405FN using Tapatalk
 
Wheels look good Scout!

Got my Jeep under the lifting beam and rigged the engine up starter off and PS engine mount removed letting the oil drain overnight so I can drop the pan and tackle the oil pump and do a bearing roll.

Anybody know if the electrical bulkhead connector comes off left/right side of engine bay?
Was starting to pull the grill for better access to the timing chain and wanted to leave the head light harness installed in one piece.


Sent from my iPhone using Tapatalk
 
Basod said:
Wheels look good Scout!

Got my Jeep under the lifting beam and rigged the engine up starter off and PS engine mount removed letting the oil drain overnight so I can drop the pan and tackle the oil pump and do a bearing roll.

Anybody know if the electrical bulkhead connector comes off left/right side of engine bay?
Was starting to pull the grill for better access to the timing chain and wanted to leave the head light harness installed in one piece.


Sent from my iPhone using Tapatalk
Click to expand...
If your talking about splitting your factory fuse block from the firewall connector then yes. There is a screw dead centre in the block accessed from the engine bay that holds the block together (driver side). Provided its original.

Sent from my Pixel 2 using Tapatalk
 
Painted the WILLYS and 4 WHEEL DRIVE logos on the 3a today. I used stencils and out spray adhesive on the back to hold them onto the Jeep. They worked well, and I only had a little clean up after I pulled the stencils off

b197979f25708773460d83f1a80efdd1.webp

d75ef833549d52e31a4a6900c0a2492e.webp

3493e9d69bb63151f371dfa242eaabfa.webp
 
Finally got off my big ol fat butt and finished up the hard uppers. Got em ready to go, and while it’s monsooning here, I dropped of one of the lock cylinders to have a set of keys made. By this weekend they should be on board and lockable ( to prevent theft - the interior lock button has been disabled.


Sent from my back deck overlooking the yard that now looks like beef stew....... that was a good bit of rain today.
 
ls said:
Finally got off my big ol fat butt and finished up the hard uppers. Got em ready to go, and while it’s monsooning here, I dropped of one of the lock cylinders to have a set of keys made. By this weekend they should be on board and lockable ( to prevent theft - the interior lock button has been disabled.


Sent from my back deck overlooking the yard that now looks like beef stew....... that was a good bit of rain today.
Click to expand...

I disabled my lock button also and a small screw on thing a ma jig that keeps the door from coming right off if someone thought they could just lift the door right off. We are finally done with the lightning and rain here, but the wind is still kicking at 20-30 mph. Lost power for 3 hours yesterday evening also
 
We had a couple close lightning strikes near our office - shook the building. Hadn’t been too windy tho.......


Sent from the rifle cleaning bench...
 
Crazy weather here in East Tennessee the past couple of days. Temps in the 70's last week, thunder storms, tornado watch and flooding yesterday and today woke up with a couple of inches of snow.
Anyway took the Jeep out for its maiden voyage in what little snow we had. Since it had warmed up to above freezing by this time and with all the rain yesterday it was more muddy than snowy.
The Jeep did great though even with the street tires on him. The wife and I took a little drive through the woods here on our little farm.
Sorry about the duplicate pic, can't seem to delete it............

snow jimmy2.webp

snow jimmy 3.webp

snow jimmy 4.webp
 
Last edited:
We had a little sun today (still 40°), so I took pics of the willys after painting the letters black

5744b517206d015585f238767194454a.webp

9f06d5ee862d11ae2e5a94e9ed458f1c.webp

Also started the teardown of the 4.0 that will be going into the Scrambler. Will take the heap apart another day.
970d80cc68613c495dd7fc505020398d.webp
 
I finally have some input. Yesterday I cleaned and painted the original AMC20 . Next for it will be the new 4.10s. Today I finished cleaning the engine harness. Mostly repairing my 273,000 butt connectors from years of patching. I also cleaned the intake and got a coat of primer on it. Sorry no pics of the intake work. I installed fenders and hood and removed the rusted out windshield frame and broken windshield. I also shuffled it around in the shop. Closer to the tools. Which means closer to the door and running.

182c4730aec035867121cb0bd8d2b6cf.webp 46f06a5ac5d5f1a7998fe5cef828547f.webp

Sent from my LG-H871 using Tapatalk
 
I inly found the motivation to finish up the TJ uppers for my half doors.....

Before
d3a4c79282c429cef95f172bb531c090.webp

After
a8105e5e7e805fdbc9f704f8439231d4.webp

I gotta admit - I kinda got used to the full black door look.....


Sent from the rifle cleaning bench...
 
shum8 said:
I inly found the motivation to finish up the TJ uppers for my half doors.....

Before
d3a4c79282c429cef95f172bb531c090.webp

After
a8105e5e7e805fdbc9f704f8439231d4.webp

I gotta admit - I kinda got used to the full black door look.....


Sent from the rifle cleaning bench...
Click to expand...
I like the 1/2 door look better. Just looks more natural I think.
 
Belizean said:
I like the 1/2 door look better. Just looks more natural I think.
Click to expand...



Thanky, sir........ but it kinda gives me that itchy Wrangler feeling. But I do like this setup WAY better than the full doors. I hate those things.


Sent from the rifle cleaning bench...
 
shum8 said:
Thanky, sir........ but it kinda gives me that itchy Wrangler feeling. But I do like this setup WAY better than the full doors. I hate those things.


Sent from the rifle cleaning bench...
Click to expand...

Well you do have a Wrangler body
 
You must log in or register to reply here.

Similar threads

F
  • Question<br> <font color=black> Reply's are voted<br> on for best answer</font> Question
    Reply's are voted
    on for best answer
How do I? I have a 1969 CJ-5 that the ignition switch keeps rotating in the dash. How do I fix that?
2
Replies
21
Views
506
Posi
Posi
B
  • Question<br> <font color=black> Reply's are voted<br> on for best answer</font> Question
    Reply's are voted
    on for best answer
How do I? ‘83 CJ7 Heat troubles
Replies
5
Views
189
boney
boney
A
  • Poll<br> Best for votes<br> on specific items Poll
    Best for votes
    on specific items
Misc. What color do you like?...Poll
Replies
14
Views
989
Longslyde
L
Project86
Misc. So how much can you pack in your rig...
Replies
5
Views
612
duffer
duffer
A
  • Question<br> <font color=black> Reply's are voted<br> on for best answer</font> Question
    Reply's are voted
    on for best answer
Misc. played in the snow today
Replies
1
Views
508
TSB8C
TSB8C

Jeep-CJ Donation Drive

Help support Jeep-CJ.com by making a contribution.

Help support Jeep-CJ.com by making a contribution.
Goal
$200.00
Earned
$0.00
This donation drive ends in
0 hours, 0 minutes, 0 seconds
  0.0%
Contribute
Back
Top Bottom