Build Thread 83 CJ7 its time to get it done

[gert]

It's not as heavy duty as a T-18 /NP435/NV4500 but it's a pretty good Transmission keep it you won't break it


Sent from my iPhone using Tapatalk

 

[95yjman]

It's not as heavy duty as a T-18 /NP435/NV4500 but it's a pretty good Transmission keep it you won't break it


Sent from my iPhone using Tapatalk

Rock on, I have heard some decent stuff about it. Man they used to build jeeps with such decent drivetrain components back in the day.

 

[gert]

Rock on, I have heard some decent stuff about it. Man they used to build jeeps with such decent drivetrain components back in the day.

I picked my 83 because it was in the best year range I wanted the wide trac axles Dana 300 Transfer Case and a T-5 behind the I6, the fully boxed frame as long as you keep the AMC 258 i6 / 4.2l and stay in the 33" tire range the stock components will do good with a little beefing up, when my AMC 258 i6 / 4.2l died I wanted a V8 and I couldn't find a AMC 304 so I knew the stock drivetrain needed to go with as much as I like using the gas peddle


Sent from my iPhone using Tapatalk

 

[gert]

Bid is in on the Nv4500 fingers crossed that they accept it, looking forward to finishing the Transmission and getting on to the axles


Sent from my iPhone using Tapatalk

 

[95yjman]

Hope you get it dude


Sent from my iPhone using Tapatalk

 

[gert]

Hope you get it dude


Sent from my iPhone using Tapatalk

BAAAMMMM

He accepted my offer of $275 tonight looks like I have a housing for sale myself

This is a shot of the inside of the housing to confirm that his ad is incorrect and that it actually is an early 92-94 Chevy low gear housing




94 95 96 97 98 99 00 01 02 NV 4500 Dodge Five Speed Case Empty Housing | eBay

 

[gert]

more links for parts

great pdf with factory part numbers:
http://www.canadawideparts.com/downloads/catalogs/qg_NewVenture4500_Rev 11-2001.pdf

cheap prices on parts:
Midwest Transmission -

 

[gert]

Ooohhhhh just got email that my new NV4500 housing is on the way from California


Sent from my iPhone using Tapatalk

 

[95yjman]

Nice dude! Good news


Sent from my iPhone using Tapatalk

 

[gert]

That's better, it's been bothering me for a few years about how big that bumper is now it looks more proportional to the size of the jeep, also ignore the body lift, it's still jacked up from me working on the rear crossmember and gas tank


Sent from my iPhone using Tapatalk

 

[gert]

The official roiling stock on my jeep 315/70R17 Goodyear Duratracs on 17x9 Mickey Thompson Classic IIIs
You might be a Jeeper if yours rims and tires cost more than the rest of your Jeep lol

Sent from my iPhone using Tapatalk

 

[gert]

something strange here not sure what it is.......








Oh wait thats better. This is the super beef cake rear cross member from Cheifwaho@gmail.com I would totally recommend his product to anyone.....







look at how thick it is..

 

[95yjman]

At first I thought, holy freaking body lift! Lol but then read on.

What's that motor in the corner of the last photo?


Sent from my iPad using Tapatalk

 

[gert]

At first I thought, holy freaking body lift! Lol but then read on.

What's that motor in the corner of the last photo?


Sent from my iPad using Tapatalk

When I m done there will be no body lift all spring over

lol its free come get it that came out of my daughter's Mini Cooper S for the life of me I cannot figure out why clyinder #4 wont fire, I checked the cam, rockers, pulled the head checked the head gasket, pistons, cylinder wall, it will hold 100psi of shop air thru the spark plug hole but the motor only runs on 3 cylinders so I got a used motor with 30k on it and it runs great. So I still have that motor sitting in the floor in my way

 

[95yjman]

When I m done there will be no body lift all spring over



lol its free come get it that came out of my daughter's Mini Cooper S for the life of me I cannot figure out why clyinder #4 wont fire, I checked the cam, rockers, pulled the head checked the head gasket, pistons, cylinder wall, it will hold 100psi of shop air thru the spark plug hole but the motor only runs on 3 cylinders so I got a used motor with 30k on it and it runs great. So I still have that motor sitting in the floor in my way

That's ok man, I don't have a Mini Cooper lol that's really weird though, why it won't fire.

 

[gert]

That's ok man, I don't have a Mini Cooper lol that's really weird though, why it won't fire.

your guess is as good as mine, that car has frustrated me to no end, I looked really hard to find a mechanical problem with that motor and I couldn't find one so I got one off ebay and moved on I have been meaning to put it on craigslist and shove it out the garage door free to the first person that hauls it off but just haven't got to it yet... maybe need to do it this week that would get me some more room in the garage

 

[95yjman]

your guess is as good as mine, that car has frustrated me to no end, I looked really hard to find a mechanical problem with that motor and I couldn't find one so I got one off ebay and moved on I have been meaning to put it on craigslist and shove it out the garage door free to the first person that hauls it off but just haven't got to it yet... maybe need to do it this week that would get me some more room in the garage

Do you take stuff to the scrap yard? Maybe get a bunch of scrap metal together and add that in. Get a little money for the cj lol

 

[gert]

Do you take stuff to the scrap yard? Maybe get a bunch of scrap metal together and add that in. Get a little money for the cj lol

I have in the past, I had an entire bed full of steel years ago and got $140 out of it


Sent from my iPhone using Tapatalk

 

[95yjman]

I have in the past, I had an entire bed full of steel years ago and got $140 out of it


Sent from my iPhone using Tapatalk

I think the most I have gotten is 60 bucks. It's never much but Better than just tossing it if it won't sell

 

[gert]

I think the most I have gotten is 60 bucks. It's never much but Better than just tossing it if it won't sell

Scrapping is hard work, I don't have room anymore with the new house to accumulate much


Sent from my iPhone using Tapatalk