Help
-
Hello Guest, we are proud to now have our Wiki online that is completely compiled and written by our members. Feel free to browse our Jeep-CJ Wiki or click on any orange keyword when looking at posts in the forum.To dismiss this noticeclick the top right X.
Help
- Thread starter moose
- Start date Start date:
- Last post Last post:
CJ
Admin
- Posts
- 22,409
- Media
- 762
- Resources
- 193
- Solutions
- 37
- Thanks
- 743
- Location
- Central FL
- Vehicle(s)
- '72 CJ5, 401, T18, D20, D44, D30
'82 CJ8, 258, D300, AMC20, D30
Unless you swap on an early model windshield frame - it will not fit. Your frame is flat across the top and the early model frames are bowed.
TDHofstetter
Prefers carburetors & points
- Posts
- 1,003
- Thanks
- 4
- Location
- Bradford, Vermont
- Vehicle(s)
- '73 CJ5 232/T14/D20/D30/D44,
'74 CJ5 Renegade 304/T15/D20/D30/D44,
'85 CJ7 258/T5/D300/D30/AMC20,
(Not CJ: '68 M715 230/T98/NP200/D60/D70)
I'm gonna' say "definitely not". That was TWO model changes & windshield changes ago. The windshield in the '71 had top-mounted wipers (vacuum-operated or manual, I think). The windshield in '72 through '75 had bottom-mounted wipers with the motor on the outside, and the upper hinge halves integral to the windshield, which could be removed by tilting it forward & lifting it off. The '76 & up windshield is a different animal with a different profile, still bottom-wiper but motor inside & hinges non-separable. You CAN put a '72-'75 windshield on it provided you migrate '72-'75 hinges along with it, but the '71 windshield isn't compatible with the '72, either. Gets ya one step closer, but not close enough.