Inside TUB...Cleanup & Rhine Lining/Help

[khass0410]

I didnt take mine down to bare metal. Just removed all of the lose stuff and filled in screw holes from po

Well hopefully I won't take it down to metal but may not have a choice. I'm going to pick up the degreaser and scrub brush tomorrow along with some sandpaper what grit would you say?

 

[tjmons]

Well hopefully I won't take it down to metal but may not have a choice. I'm going to pick up the degreaser and scrub brush tomorrow along with some sandpaper what grit would you say?

I wire brushed mine. Only used sandpaper on the filled holes. If I remember right the rougher the finish the better the monstaliner will stick. After 2 or 3 cleanings I wiped the whole tub down with acatone.

 

[khass0410]

I wire brushed mine. Only used sandpaper on the filled holes. If I remember right the rougher the finish the better the monstaliner will stick. After 2 or 3 cleanings I wiped the whole tub down with acatone.

Yea I just don't want to prime it if I don't have to....I'm afraid if I use a sander or wire brush it might take the paint right off if there is any lol.

 

[tjmons]

Yea I just don't want to prime it if I don't have to....I'm afraid if I use a sander or wire brush it might take the paint right off if there is any lol.

My tub was in rellay good shape. I wire brushed just enough to remove anything that was loose and rough it up.

 

[khass0410]

My tub was in rellay good shape. I wire brushed just enough to remove anything that was loose and rough it up.

Lol, well theres my problem i'm picturing your tub looking like mine hahaha ok sooooo I guess I shall look for primer to lol

Thanks bud

 

[tjmons]

Lol, well theres my problem i'm picturing your tub looking like mine hahaha ok sooooo I guess I shall look for primer to lol

Thanks bud

Here is a picture of my tub before starting prep work

 

[khass0410]

Here is a picture of my tub before starting prep work

muhahahahah did you even need prep my friend ....jk jk I'm astonished of how NASTY mine is I'm jealous lol :drool:

 

[tjmons]

muhahahahah did you even need prep my friend ....jk jk I'm astonished of how NASTY mine is I'm jealous lol :drool:

My po stored the cj for the past 25 years in a garage. Never drove it in the winter. The whole cj is in that kind of condition. I think you will be suprised how good yours will turn out. Attention to detail and hardwork will end in a good result.

 

[khass0410]

My po stored the cj for the past 25 years in a garage. Never drove it in the winter. The whole cj is in that kind of condition. I think you will be suprised how good yours will turn out. Attention to detail and hardwork will end in a good result.

My wife bought me my CJ that and well I put a little work in there to get it but I don't know its history at all I think it came from OHIO though lol

I hope so to be honest ive had hell with the last two projects on her I rewired her and put a 2 1/2" suspension lift on her with a 1/2" shackle lift. I am going to do this lining re-do all the brakes and rear drive shaft to a double cardan shaft. I've been looking everywhere for a brake kit that has everything but can't find one. The drive shaft is just to much money right now and the steering I am still piecing everything I need to get for it.

I will take lots of pics be prepared though I tend to ask TONS of questions lol

 

[tjmons]

My wife bought me my CJ that and well I put a little work in there to get it but I don't know its history at all I think it came from OHIO though lol

I hope so to be honest ive had hell with the last two projects on her I rewired her and put a 2 1/2" suspension lift on her with a 1/2" shackle lift. I am going to do this lining re-do all the brakes and rear drive shaft to a double cardan shaft. I've been looking everywhere for a brake kit that has everything but can't find one. The drive shaft is just to much money right now and the steering I am still piecing everything I need to get for it.

I will take lots of pics be prepared though I tend to ask TONS of questions lol

Collins Brothers Jeep Parts & Accessories
Have you looked here ?

 

[khass0410]

There about 30 minutes from where I live lol but I forgot all about them I'm looking for some along the lines of this but I already have to 11" drums so I am just looking for all this insides + shoes and drums

RP 4WD // Serious Off-Road Since 1989 — CJ 11" Drum Kit

 

[khass0410]

Pictures of some of the progress....Just received the Monster Lining in the mail.

 

[khass0410]

and another one.

 

[tjmons]

Looking good , making some progress. Looks like you are going with a bed liner ? What color did you go with.

 

[khass0410]

Looking good , making some progress. Looks like you are going with a bed liner ? What color did you go with.

Just the black I like yellow and black lol may be plain but oh well. Not sure when I will be able to put it on because of all the storms going around but hopefully soon.

 

[thiswontbetooexpensive]

Let me know how it goes, I'm going to order the same kit in the next week or so.

 

[khass0410]

Let me know how it goes, I'm going to order the same kit in the next week or so.

Sure will I'm thinking I will try to get it done this Saturday if the rain will stop. lol

 

[khass0410]

More Pictures pressure washed the inside and it works GREAT on old lining pulled it right up on the 0" a little bit to go... probably going to pressure wash a little more then go over it with some 180 grit sandpaper and scotch pad her lol lots to do tomorrow.


Do y'all think I should go ahead and remove my dash?

Also does any of this stuff under the shifters look bad? what should I do with them...Like do I need to replace anything there?

Thx

 

[thiswontbetooexpensive]

Sure will I'm thinking I will try to get it done this Saturday if the rain will stop. lol

I wouldn't lament the rain too bad, it might turn off like a few years back! We are still cutting down dead and dying trees...

 

[khass0410]

I wouldn't lament the rain too bad, it might turn off like a few years back! We are still cutting down dead and dying trees...

Lol, Your only 3 hours away and y'all have not received any of this? Thats all it's been doing over here for the past week a long with the 5 days of summer 1 day of winter kind of seasons......

I'm really dreading doing this job, I dread almost anything I do to this jeep lol. The longer I wait the more I worry i'm not going to do something right. Like my the suspension lift for instance I wish I would have painted the axles and the bottom of my jeep with all that out from under there lol.

Anyways what do you think about my dash you think I should remove it when doing the job I really don't thnk I need to go that far up I need opinions lol unless the rain keeps coming (oh wait there goes the dish) more storms in North TX i'm sure IOPORT knows what i'm talking about.