Build Thread Starting from the frame 1977 CJ5

[CJ]

Frame repair is done all patches are in and new body mounts and rear bumper welded in. Rear half painted with Eastwood Rust encapsulator plus done. Now on to the front half of the frame. Should be easier as there is nothing to repair just clean off and encapsulate.

View attachment 106571

View attachment 106572

View attachment 106573

Nice work and great progress. The Eastwood encapsulator is great stuff.

 

[Tim_Coble]

If you get a chance, could you measure the center to center distance between the rear x-member body mount and the intermediate mount? I thought I had measured it before I cut the rear x-member off but if I did I have no idea what I did with it.

 

[Serdich77CJ5]

Tim I will measure it but I may not have the right measurements because one of the previous owners cut off the original rear x-member.

You must login or register to view hidden content on this page.

 

[Serdich77CJ5]

If you get a chance, could you measure the center to center distance between the rear x-member body mount and the intermediate mount? I thought I had measured it before I cut the rear x-member off but if I did I have no idea what I did with it.
View attachment 106574

From Hole to Hole 42.5in.

You must login or register to view hidden content on this page.

 

[Tim_Coble]

You're the best!

You must login or register to view hidden content on this page.