What did you do to or with your CJ today?

[shum8]

Finally got the hard top off - after a month and a half of whining. Whenever I had time it was raining, and when it was nice I was slammed. Finally got it done. So today if it’s still dry after work I’ll be tooling around topless [emoji6]


Sent via my universal translator

 

[j6824]

Finally found one...picked it up this weekend

Next on the list is a 300

 

[gert]

Love that cover


Sent from my iPhone using Tapatalk

 

[Project86]

Finally got around to putting on the cover on my rear differential. The new one has a drain plug so I won't have to pull the cover to change the oil.

Sent from my ALE-L21 using Tapatalk

I just recently installed the same one, just haven't posted the pict yet. Looks good.

 

[gert]

Ball joint day finally definitely need the right tools for the job I had forgot about the amount of brute force required I really like my synergy ball joints now I have to find the torque spec for the c arms again

Sent from my iPhone using Tapatalk

 

[gr8dain]

Ball joint day finally definitely need the right tools for the job I had forgot about the amount of brute force required I really like my synergy ball joints now I have to find the torque spec for the c arms again

Sent from my iPhone using Tapatalk

I need new ball joints too. I have not had the time to do them. And need to borrow the tools, so I was getting new tires for the front and was willing to pay the shop to do it. They could not remove the flange so now I have new tires that are going to wear poorly until I get the ball joints done. Grrrr.

 

[gert]

I need new ball joints too. I have not had the time to do them. And need to borrow the tools, so I was getting new tires for the front and was willing to pay the shop to do it. They could not remove the flange so now I have new tires that are going to wear poorly until I get the ball joints done. Grrrr.

I went to orielly auto and borrowed their c clamp as well as the 4x4 adapter for the ball joint press it took me about 4 hours or so to do it on both sides


Sent from my iPhone using Tapatalk

 

[Belizean]

I went to auto zone and borrow their tool, did the wife's Cherokee, a buddy helped me, what a real pain,

 

[gr8dain]

I went to auto zone and borrow their tool, did the wife's Cherokee, a buddy helped me, what a real pain,

A friend bought a snap on press and it was so much better than the one from advance or auto zone.

 

[Belizean]

A friend bought a snap on press and it was so much better than the one from advance or auto zone.

Yea those are not very good. I actually had to use a 3/4 in drive socket I had to get it to work well enough. Like they say, takes the right tools to make it easier

 

[Scout1067]

Replaced my rear driveshaft u-joint. A surprisingly easy job. Maybe it was the supervision from my two little helpers.[emoji23][emoji23][emoji23]

Sent from my ALE-L21 using Tapatalk

 

[gert]

Lol dang you caught that one right before it exploded


Sent from my iPhone using Tapatalk

 

[Scout1067]

Lol dang you caught that one right before it exploded


Sent from my iPhone using Tapatalk

I know. What I don't get is why it failed so fast. I lubed the entire driveline in March when I did my ball joints.

Sent from my ALE-L21 using Tapatalk

 

[gert]

I know. What I don't get is why it failed so fast. I lubed the entire driveline in March when I did my ball joints.

Sent from my ALE-L21 using Tapatalk

Had to have been going south before March then, I am an industrial mechanic and it is neat to watch our conveyor shafts eat themselves in half, just takes that initial bit of movement and it will slowly grind itself into dust


Sent from my throne using Tapatalk

 

[gert]

The eagle has left the nest


https://youtu.be/a4i3KtSmYNg

Will get an alignment, brakes bled and inspection tomorrow


Sent from side of the road with flat tire using Tapatalk

 

[Impory]

Nice rig...like that look...

 

[shum8]

Just drove it. Didn’t fix anything, didn’t lose anything, just enjoyed a topless ride before the storms hit

<iframe width="560" height="315" src="https://www.youtube.com/embed/hF4qpyAXCrM" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>


Sent via my universal translator

 

[shum8]

Hmmmm - no sound....

Try this

https://youtu.be/hF4qpyAXCrM

Beats me - make your own Jeep sounds I guess.....


Sent via my universal translator

 

[Belizean]

Hmmmm - no sound....

Try this

https://youtu.be/hF4qpyAXCrM

Beats me - make your own Jeep sounds I guess.....


Sent via my universal translator

I heard sound !

 

[shum8]

Well, heck - I tried imbedding and linking and neither made sound when I tried it. Guess it knew I already knew what it sounded like LOL


Sent via my universal translator