Who owns what year?
Who owns what year?
- Thread starter BrockGrimes
- Start date
LongHorn
Always Off-Roading Jeeper
- Posts
- 5,325
- Media
- 39
- Thanks
- 1
- Location
- Washington Co.,Texas
- Vehicle(s)
- 83'CJ-8 Scrambler Slightly Modified;),48'CJ2A, 54'CJ3B 67'Jeep M-725, 88'YJeep Wrangler Slightly Modified;)
patrickG
Jeeper
- Posts
- 24
- Thanks
- 0
- Location
- Hardin,Montana
- Vehicle(s)
- 1980 CJ-7 GM 350 Borg Warner SR-4 Dana 300 Dana 30 front AMC 20 rear.
No kidding! I'm still trying to figure out what to replace it with.
LongHorn
Always Off-Roading Jeeper
- Posts
- 5,325
- Media
- 39
- Thanks
- 1
- Location
- Washington Co.,Texas
- Vehicle(s)
- 83'CJ-8 Scrambler Slightly Modified;),48'CJ2A, 54'CJ3B 67'Jeep M-725, 88'YJeep Wrangler Slightly Modified;)
No kidding! I'm still trying to figure out what to replace it with.
What do you use your rig for?
patrickG
Jeeper
- Posts
- 24
- Thanks
- 0
- Location
- Hardin,Montana
- Vehicle(s)
- 1980 CJ-7 GM 350 Borg Warner SR-4 Dana 300 Dana 30 front AMC 20 rear.
Daily driving and hunting.
LongHorn
Always Off-Roading Jeeper
- Posts
- 5,325
- Media
- 39
- Thanks
- 1
- Location
- Washington Co.,Texas
- Vehicle(s)
- 83'CJ-8 Scrambler Slightly Modified;),48'CJ2A, 54'CJ3B 67'Jeep M-725, 88'YJeep Wrangler Slightly Modified;)
I used a T19 in my current rig, I went with the 6.32 low gear.
You might want to go with a higher 1st gear.
The T-176 is a lighter easier shifting Transmission , but still strong enough for a V8.
Advanced Adapters even makes a adapter for a muncie.
cj7jeepnjoe
Jeeper
- Posts
- 12
- Thanks
- 0
- Location
- calif
- Vehicle(s)
- 79 cj7 304 t-150 32"tires 2"shackle lift
79 cr 500. 04 trx 400 ex.
03 weekend warrior fs 32
06 duramax ext lb. 03 1500 hd ccsb
i have a 79 AMC 304 ,T-150 ,Dana 20 30 front,model 20 rear.
using all the parts from the 79 waggy.
360 th 400 and yes the quadra trac.
ive had it for 10 years now and stripped the hub pulling in my driveway, broke a shaft in pismo. and broke the pinion yoke in the rear at ocotillo.
i am sooo done with the 20.
all this and i dont even wheel hard
using all the parts from the 79 waggy.
360 th 400 and yes the quadra trac.
ive had it for 10 years now and stripped the hub pulling in my driveway
, broke a shaft in pismo. and broke the pinion yoke in the rear at ocotillo.i am sooo done with the 20.
all this and i dont even wheel hard
patrickG
Jeeper
- Posts
- 24
- Thanks
- 0
- Location
- Hardin,Montana
- Vehicle(s)
- 1980 CJ-7 GM 350 Borg Warner SR-4 Dana 300 Dana 30 front AMC 20 rear.
I used a T19 in my current rig, I went with the 6.32 low gear.
You might want to go with a higher 1st gear.
The T-176 is a lighter easier shifting Transmission , but still strong enough for a V8.
View attachment 6144
View attachment 6145
View attachment 6146
View attachment 6147
Advanced Adapters even makes a adapter for a muncie.
Thats good advice I'm going Transmission hunting this weekend.
OldC7
Jeeper
- Posts
- 196
- Media
- 8
- Thanks
- 0
- Location
- Dayton, OH
- Vehicle(s)
- 1985 CJ7,258/T5. (stock)
Power steering/power brakes.
Hardtop.
51 Ford F1 Truck
C dubya
Active Jeeper
- Posts
- 388
- Thanks
- 0
- Location
- Bartlesville, OK
- Vehicle(s)
- 83 Jeep CJ-7 Renegade,
258 I-6,
T-4(Soon to be a T-19),
Dana 300,
1987 Grand Wagoneer,
360 V8, 2008 Chevy 2500HD Z71 Crewcab, 6.0 V8
RazorbackCJ7
Jeeper
- Posts
- 22
- Media
- 14
- Thanks
- 0
- Location
- NW Arkansas
- Vehicle(s)
- 1979 CJ7. Fresh 258 I6 stock T-150 D20 AMC20, 2008 Dodge 2500 Ram 4x4 6.7L Cummins 6 speed auto, 2009 Kawasaki ZX-10R.
- Posts
- 5,832
- Media
- 186
- Resources
- 1
- Thanks
- 74
- Location
- Plumas Lake, CA, USA
- Vehicle(s)
- 1974 CJ5 ~ Fresh built AMC 360 - SM420 - D20 - D30F with upgraded 30 spline shafts and knuckles & D44R - 4.27 Gears - ARB Lockers F/R - All chrome molly axles - on 33's - YJ 4" Lift Spring Conversion
JJs85cj
Jeeper
- Posts
- 76
- Thanks
- 0
- Location
- Bogue Chitto, Ms
- Vehicle(s)
- 1985 CJ7 258 in line six with the old JFI kit, T5 trans and dana 300 transfer case.
JJs85cj
Jeeper
- Posts
- 76
- Thanks
- 0
- Location
- Bogue Chitto, Ms
- Vehicle(s)
- 1985 CJ7 258 in line six with the old JFI kit, T5 trans and dana 300 transfer case.
ak81jeep
Jeeper
- Posts
- 24
- Media
- 6
- Thanks
- 0
- Location
- wasilla alaska
- Vehicle(s)
- bone stock 74 cj6 buggy project
94 cherokee about 8 in lift and 35 boggers
74 cj6a here
:us:
:us:
- Posts
- 5,832
- Media
- 186
- Resources
- 1
- Thanks
- 74
- Location
- Plumas Lake, CA, USA
- Vehicle(s)
- 1974 CJ5 ~ Fresh built AMC 360 - SM420 - D20 - D30F with upgraded 30 spline shafts and knuckles & D44R - 4.27 Gears - ARB Lockers F/R - All chrome molly axles - on 33's - YJ 4" Lift Spring Conversion
robeeto
Jeeper
3QuarterTon CJ
Jeeper
- Posts
- 173
- Thanks
- 1
- Location
- Central PA
- Vehicle(s)
- 1982 Jeep CJ-7 350 Chevy V-8, SM-465 4-speed trans, Dana 300 Twin Stick, Narrowed and locked GM 14 bolt rear, Narrowed and locked Dana 44 front, 38.5" Super Swampers. Fiberglass tub. 6 point roll cage.
Niedhogg
Old Time Jeeper
- Posts
- 1,318
- Thanks
- 0
- Location
- Thor, Iowa
- Vehicle(s)
- '79 Jeep CJ7 Renegade with 304ci V8, TH400 auto, Quadratrac T-case, Stock 20 and 30 rears with no mods yet, not sure of the gear ratio.. 4" Softride Superlift, w/widetrac shock towers and 35x12.50x15 BFG Mud-Terrains
'76 CJ5, 232 ci, T-150 3-speed, D20 T-case, Corp. 20 rear w/full float axles and lockout hubs and Detroit auto locker, D30 front w/lockout hubs, gear ratio is unknown..