Electrical Wiring help needed badly.

[defibvt]

Everyone says rewiring a CJ is easy. I don't know where to start. I figure mounting the fuse block is the first step. I am posting a pic of my blank canvas. I am using Painless wiring kit.Where do I mount the fuse block? I don't want it to interfere with the pedal assembly and the emergency brake.

 

[Manic Mechanic]

looks like someone filled in ur square hole

Sent from my E6810 using Tapatalk

 

[defibvt]

Hole drilled. Grommet fashioned to cover edges.

Sent from my SM-G965U using Tapatalk

 

[RichChapin]

looks like your doing the same as what i started, the dash design was the hardest part. the the location of the new fuse blocks that are not under the dash.
I used marine grade wire
rocker switches and the fund the plugs for them
bulk heads for wires to run threw fire wall
solder and shrink every wire and terminals
then label wire set
buy fuse blocks that have ground buses on them
waterproof relays and fuse boxes that houses relays waterproof

bought all my stuff off of amazon

 

[RichChapin]

forgot this one to

 

[defibvt]

I can't seem to start a new thread so I am posting this here.

I need to know what these switches are too. I think the first one is for thw headlights.

Sent from my SM-G965U using Tapatalk

 

[Scout1067]

Top one is a headlight switch and bottom looks like a heater 3-position block to me. I can get you the part number for the headlight switch when I get to my computer. When I rewired my Jeep last spring I just rewired my heater fan to be on or off.

Sent from my SM-A405FN using Tapatalk

 

[Scout1067]

I used the SMP headlight switch, the only other suppliers for a CJ7 switch for the headlight I could find were Omix or Crown.
https://www.summitracing.com/parts/smp-ds216/make/jeep/model/cj7/year/1981

 

[defibvt]

Thamks for the assist. Both switches work. So I am good.

Sent from my SM-G965U using Tapatalk

 

[RichChapin]

looking at the light switch
i see that the wire has been updated
The wires have labels