Horn Contact help!
76cj7chick
Old Time Jeeper
- Posts
- 1,234
- Thanks
- 8
- Location
- WA
- Vehicle(s)
- 1976 CJ7 Jeep with a engine/tranny/wiring harness out of a 1988 s10 blazer 4.3l v6 with th700r4 automatic tranny and a cj7 Dana 300 transfer case with Novak adapter.
Complete wiring harness from the s10 blazer. Painted with HOT PINK Pearl paint with standard sized metallic halographic pink flakes. Painted by me -a newb. New rear, front and side three wire LED lights, New parts, new custom dash-by me And a lot of guidance from fellow jeepers and lots of prayers etc.... :p
Hi all!
When I purchased my 1976 CJ7 jeep, it didn't have a horn or button. In fact, the ignition switch was wired to the dash and not in the column. Would any of the wise electrical people know where and how to connect my horn contact to the button? I tested with a ohmmeter and the wire connects when I push down in the middle of the column..
When I purchased my 1976 CJ7 jeep, it didn't have a horn or button. In fact, the ignition switch was wired to the dash and not in the column. Would any of the wise electrical people know where and how to connect my horn contact to the button? I tested with a ohmmeter and the wire connects when I push down in the middle of the column..